Karvuu Industries
Shivalik Nagar, Haridwar, Uttarakhand
GST No. 05AAUFK3678A1Z6
Call 08042984856 91% Response Rate
Send E-mail

Testing Machine

Prominent & Leading Manufacturer from Haridwar, we offer tensile testing machine, din abrasion tester, tensile rubber testing machine and computerized universal load testing machine.
Request CallBack
Tensile Testing Machine
Ask For Price

Tensile Testing Machine

Product Price : Get Latest Price
Product Details:
Usage/ApplicationLaboratory
Capacity500 kg x 0.1 kg least count
PhaseSingle
MaterialMild Steel
Display TypeLED
Frequency50 Hz
Voltage220 VAC
Power1000 W
Speed300 -500 mm/min
Motor1 HP, single phase induction motor
Traverse25 - 900 mm
Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. 

Tensile Testing Machine provide a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton. The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips. Changing the belt in one or more sets of V pulley can change the speed of traverse of the lower grip. Different model have speeds suitable for testing different materials. An arrangement for moving the lower grip manually is also provided.

Yes! I am Interested
Request CallBack
DIN Abrasion Tester
Ask For Price

DIN Abrasion Tester

Product Price : Get Latest Price
Product Details:
MaterialMS
Frequency50 Hz
Usage/ApplicationLaboratory
Specimen Dimensions16 mm Diameter With Minimum Height Of 6 Inch
Rotating Drum Dimension150 Mm Diameter With X About 460 Mm Long
Rotation Drum Speed40 RPM
Rotation Of Test Specimen1 Revolution Per 50 Revolutions Of Drum
Test Specimen Load5/10 N
Total Length Of Abrasion Run40 Meters (About 84 Revolutions)
In din method of determine abrasion resistance of vulcanized natural or synthetic, a cylindrical rubber test specimen is abraded against an abrasive surface mounted on a rotating cylindrical drum in such a manner that abrasion takes place on one of the flat ends of the test specimen which is held against the abrasive surface under a specified load while being traversed across it. The ratio of the volume loss of a standard rubber to the volume loss of the test rubber measured under the same conditions, expressed as a percentage, gives the abrasion resistance index of the rubber under test. 

Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement to the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degree to the perpendicular in the direction of rotation and placed above the longitudinal axis of drum. A rack and pinion arrangement to rotate the test specimen about its axis during the test (whenever desired) is also provided. 

The abrasive cloth is firmly fixed to the drum using a suitable peel able adhesive with the ends of the abrasive cloth butt jointed together. The equipment is provided with limit switches which, in addition of giving over travel safety to the movement of test holder by preventing the lower edge of the test specimen holder to touch the abrasive cloth. The equipment is built on rigid steel base and finished in grey metallic and bright chrome /zinc plating to give it a corrosion resistant finish. Moulding die, rotary type cutting die(hollow drill) for preparing test specimens and extra abrasive cloth are available as optional accessories. 

Yes! I am Interested
Request CallBack
Tensile Rubber Testing Machine
Ask For Price

Tensile Rubber Testing Machine

Product Price : Get Latest Price
Product Details:
Usage/ApplicationRubber Testing
Capacity500 kg x 0.1 kg least count
MaterialStainless Steel
Display TypeLED
Frequency50 Hz
Voltage220 VAC
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

COMPUTERIZED UNIVERSAL LOAD TESTING MACHINE

Product Price : Get Latest Price
COMPUTERIZED UNIVERSAL LOAD TESTING MACHINE
Ask For Price

Explore more products

X